export@oliver.by +375 17 387 01 43
Interested in purchasing welding materials?
Our managers are here to answer all your questions!
Welding wire and stick electrodes
Best welding materials
Delivery all across Europe
export@oliver.by
For cooperation contact us
via email: export@oliver.by
via email: export@oliver.by
Welding wire and stick electrodes
Best materials only
Delivery all over Europe
export@oliver.by
For cooperation contact us
via e-mail: export@oliver.by
via e-mail: export@oliver.by
Products Catalog
ER 70s-6, G3Si1, G4Si
For GMAW (Gas metal arc welding) Mig/Mag/Tig
For GMAW (Gas metal arc welding) Mig/Mag/Tig
ER 70s-6, G3Si1, G4Si
For GMAW (Gas metal arc welding) Mig/Mag/Tig
For GMAW (Gas metal arc welding) Mig/Mag/Tig
For SAW (Submerged arc welding)
For GMAW (Gas metal arc welding) Mig/Mag/Tig of stainless steel
MMA for welding of carbon steel and low-alloyed steel, stainless steel and cast iron
Sae 1006 Sae 1008
MIG Oliver COPPER FREE welding wire AWS ER70S-6 / EN SG2 (G3Si1) / EN SG3 (G4Si1) / GB: ER50-6, ER49-1
ER70S-6 / SG2 / SG3 / G3Si1 / G4Si1 is a low carbon steel welding wire. It is suitable for 100% CO2 or 80/20 (Ar + CO2) gas mix protective welding with stable feedability, good welding seams, almost no spatters and excellent welding process properties.
ER70S-6 is widely used in bridges, vehicle manufacturing, shipbuilding, hydraulic engineering, steel structure engineering etc.
Advantages of copper free welding wire:
- Minimum spatter;
- Excellent welding performance and feedability;
- More stable arc;
- Longer lifetime of welding torch parts;
- ECO-friendly;
MIG diameter: 0.8mm - 2.0mm
Wire grade (ER49-1, G4Si1)
Chemical composition of wire: С (0,06-0,14%) Mn (1,6 – 1,9%) Si (0,80 – 1,2%) P (≤0,025%) S (≤0,03%)
Chemical composition of deposited metal: С (0,07-0,14%) Mn (1,35 – 1,65%) Si (0,55 – 0,85%) S (≤0,03%) P (≤0,025%) Cr (≤0,25%) Ni (≤0,25%)
Mechanical properties of deposited metal:
Yield point, MPa ≥375
Tensile strength, MPa 490-660
Elongation,% ≥22
Impact value, KV, J +20˚С 100-140; -60˚С – ≥47
Mechanical properties of wire (for diameter 1,2):
Tensile strength, MPa: 882-1323
Wire grade (ER70S-6, G3Si)
Chemical composition of wire:С (0,06-0,14%) Mn (1,4 – 1,6%) Si (0,70 – 1,0%) P (≤0,025%) S (≤0,03%)
Chemical composition of deposited metal: С (≤0,12%) Mn (0,95 – 1,25%) Si (0,35 – 0,85%) S (≤0,03%) P (≤0,025%) Cr (≤0,25%) Ni (≤0,25%)
Mechanical properties of deposited metal:
Yield point, MPa 389-420
Tensile strength, MPa 500-515
Elongation,% >25
Impact value, KV, J -20˚С - ≥47; -40˚С ≥47
Mechanical properties of wire:
Tensile strength, MPa: 882-1323
Packing: plastic spools D200 (5kg) and D300 (15kg), wire baskets K300, BS300 (15kg and 18kg) with precision layer winding, wrapped in film with silica gel insert and packed in carton box. Delivered on wooden pallets (standard 800 х 1200 mm) 1080 each. Other pallets are possible under agreement with customer.
Drums 250kg/300kg each (we can provide all necessary accessories: plastic cap, adapter, cable-duct of any length, plastic cover).
ER70S-6 is widely used in bridges, vehicle manufacturing, shipbuilding, hydraulic engineering, steel structure engineering etc.
Advantages of copper free welding wire:
- Minimum spatter;
- Excellent welding performance and feedability;
- More stable arc;
- Longer lifetime of welding torch parts;
- ECO-friendly;
MIG diameter: 0.8mm - 2.0mm
Wire grade (ER49-1, G4Si1)
Chemical composition of wire: С (0,06-0,14%) Mn (1,6 – 1,9%) Si (0,80 – 1,2%) P (≤0,025%) S (≤0,03%)
Chemical composition of deposited metal: С (0,07-0,14%) Mn (1,35 – 1,65%) Si (0,55 – 0,85%) S (≤0,03%) P (≤0,025%) Cr (≤0,25%) Ni (≤0,25%)
Mechanical properties of deposited metal:
Yield point, MPa ≥375
Tensile strength, MPa 490-660
Elongation,% ≥22
Impact value, KV, J +20˚С 100-140; -60˚С – ≥47
Mechanical properties of wire (for diameter 1,2):
Tensile strength, MPa: 882-1323
Wire grade (ER70S-6, G3Si)
Chemical composition of wire:С (0,06-0,14%) Mn (1,4 – 1,6%) Si (0,70 – 1,0%) P (≤0,025%) S (≤0,03%)
Chemical composition of deposited metal: С (≤0,12%) Mn (0,95 – 1,25%) Si (0,35 – 0,85%) S (≤0,03%) P (≤0,025%) Cr (≤0,25%) Ni (≤0,25%)
Mechanical properties of deposited metal:
Yield point, MPa 389-420
Tensile strength, MPa 500-515
Elongation,% >25
Impact value, KV, J -20˚С - ≥47; -40˚С ≥47
Mechanical properties of wire:
Tensile strength, MPa: 882-1323
Packing: plastic spools D200 (5kg) and D300 (15kg), wire baskets K300, BS300 (15kg and 18kg) with precision layer winding, wrapped in film with silica gel insert and packed in carton box. Delivered on wooden pallets (standard 800 х 1200 mm) 1080 each. Other pallets are possible under agreement with customer.
Drums 250kg/300kg each (we can provide all necessary accessories: plastic cap, adapter, cable-duct of any length, plastic cover).
Все продукты
MIG Oliver COPPER COATED welding wire AWS ER70S-6 / EN SG2 (G3Si1) / EN SG3 (G4Si1) / GB: ER50-6, ER49-1
ER70S-6 / SG2 / SG3 / G3Si1 / G4Si1 is a low carbon steel welding wire. It is suitable for 100% CO2 or 80/20 (Ar + CO2) gas mix protective welding with stable feedability, good welding seams, almost no spatters and excellent welding process properties.
Application: ER70S-6 is widely used in bridges, vehicle manufacturing, shipbuilding, hydraulic engineering, steel structure engineering etc. fields.
MIG diameter: 0.8mm-2.0mm TIG diameter: 1.6mm-3.2mm
Wire grade (ER49-1, G4Si1)
Chemical composition of wire: С (0,06-0,14%) Mn (1,6 – 1,9%) Si (0,80 – 1,2%) P (≤0,025%) S (≤0,03%)
Chemical composition of deposited metal: С (0,07-0,14%) Mn (1,35 – 1,65%) Si (0,55 – 0,85%) S (≤0,03%) P (≤0,025%) Cr (≤0,25%) Ni (≤0,25%)
Mechanical properties of deposited metal:
Yield point, MPa ≥375
Tensile strength, MPa 490-660
Elongation,% ≥22
Impact value, KV, J +20˚С 100-140; -60˚С – ≥47
Mechanical properties of wire (for diameter 1,2):
Tensile strength, MPa: 882-1323
Wire grade (ER70S-6, G3Si)
Chemical composition of wire:С (0,06-0,14%) Mn (1,4 – 1,6%) Si (0,70 – 1,0%) P (≤0,025%) S (≤0,03%)
Chemical composition of deposited metal: С (≤0,12%) Mn (0,95 – 1,25%) Si (0,35 – 0,85%) S (≤0,03%) P (≤0,025%) Cr (≤0,25%) Ni (≤0,25%)
Mechanical properties of deposited metal:
Yield point, MPa 389-420
Tensile strength, MPa 500-515
Elongation,% >25
Impact value, KV, J -20˚С - ≥47; -40˚С ≥47
Mechanical properties of wire:
Tensile strength, MPa: 882-1323
Packing
MIG packing type: plastic spools D200 (5kg) and D300/D270 (15kg), wire baskets K300, BS300 (15kg and 18kg) with precision layer winding, wrapped in film with silica gel insert and packed in carton box. Delivered on wooden pallets (standard 800 х 1200 mm) 1080 each. Other pallets are possible under agreement with customer.
TIG packing: 5 kg/tube
Drums 250kg/300kg each (we can provide all necessary accessories: plastic cap, adapter, cable-duct of any length, plastic cover).
Application: ER70S-6 is widely used in bridges, vehicle manufacturing, shipbuilding, hydraulic engineering, steel structure engineering etc. fields.
MIG diameter: 0.8mm-2.0mm TIG diameter: 1.6mm-3.2mm
Wire grade (ER49-1, G4Si1)
Chemical composition of wire: С (0,06-0,14%) Mn (1,6 – 1,9%) Si (0,80 – 1,2%) P (≤0,025%) S (≤0,03%)
Chemical composition of deposited metal: С (0,07-0,14%) Mn (1,35 – 1,65%) Si (0,55 – 0,85%) S (≤0,03%) P (≤0,025%) Cr (≤0,25%) Ni (≤0,25%)
Mechanical properties of deposited metal:
Yield point, MPa ≥375
Tensile strength, MPa 490-660
Elongation,% ≥22
Impact value, KV, J +20˚С 100-140; -60˚С – ≥47
Mechanical properties of wire (for diameter 1,2):
Tensile strength, MPa: 882-1323
Wire grade (ER70S-6, G3Si)
Chemical composition of wire:С (0,06-0,14%) Mn (1,4 – 1,6%) Si (0,70 – 1,0%) P (≤0,025%) S (≤0,03%)
Chemical composition of deposited metal: С (≤0,12%) Mn (0,95 – 1,25%) Si (0,35 – 0,85%) S (≤0,03%) P (≤0,025%) Cr (≤0,25%) Ni (≤0,25%)
Mechanical properties of deposited metal:
Yield point, MPa 389-420
Tensile strength, MPa 500-515
Elongation,% >25
Impact value, KV, J -20˚С - ≥47; -40˚С ≥47
Mechanical properties of wire:
Tensile strength, MPa: 882-1323
Packing
MIG packing type: plastic spools D200 (5kg) and D300/D270 (15kg), wire baskets K300, BS300 (15kg and 18kg) with precision layer winding, wrapped in film with silica gel insert and packed in carton box. Delivered on wooden pallets (standard 800 х 1200 mm) 1080 each. Other pallets are possible under agreement with customer.
TIG packing: 5 kg/tube
Drums 250kg/300kg each (we can provide all necessary accessories: plastic cap, adapter, cable-duct of any length, plastic cover).
Все продукты
Steel welding solid wire S1 S2 S2Mo for automatic submerged-arc welding
The wire is produced in two choices: with copper-coated or polished surface. The wire is produced under our technical conditions which are more strict than State Standard requirements.
Compulsory incoming inspection allows to produce the wire with the best content of the main chemical elements and minimal content of detrimental impurities which can negatively affect welding-technological qualities of welding and quality of welding seam.
Production control on every stage let us produce the goods of high quality.
Wire stationarity and stable diameter on the whole length ensure smooth feeding of wire by the rollers of the feeding device and its free pass through the liner.
Copper coated surface as well as improved polished surface provides goos electric contact with contact tip which also positively influences on the welding-technological qualities of welding wire.
Chemical composition Raw materials are delivered to us according all our requirements which allows us to produce the wire fully corresponding with the requirements of your production. Below you can find standard types of wire which we constantly have at warehouse:
Wire grade (S1)
Chemical composition of the wire: С (up to 0,10 %) Mn (0,35 – 0,6%) Si (up to 0,03%) P (≤0,03%) S (≤0,03%)
Mechanical properties of wire:
Tensile strength, MPa: 1250-1323
Mechanical properties of deposited metal:
Yield point, MPa 350 – 370
Tensile strength, MPa 480 - 520
Elongation,% 24
Impact value, KV, J +20˚С -110; -40˚С – 50.
Wire grade (S2)
Chemical composition of the wire: С (≤0,10%) Mn (0,8 – 1,1%) Si (up to 0,06 %) P (≤0,03%) S (≤0,03%)
Mechanical properties of wire:
Tensile strength, MPa: : 1250-1323
Mechanical properties of deposited metal:
Yield point, MPa 420 - 440
Tensile strength, MPa 510-520
Elongation,% >30
Impact value, KV, J -20˚С -50; -40˚С – 30.
Wire grade (S2Mo)
Chemical composition of the wire: С (≤0,10%) Mn (0,95 – 1,2%) Si (up to 0,06 %) P (≤0,02%) S (≤0,02%)Mo (0,45 - 0,65)
Mechanical properties of deposited metal:
Yield point, MPa 510 - 520
Tensile strength, MPa 600 - 650
Elongation,% >24
Impact value, KV, J -20˚С -160;
Wire diameters, mm: 1,2; 1,6; 2,0; 2,4; 3,0; 3,2; 4,0; 5,0 (other diameters are possible under agreement with customer).
Packing: wire baskets K300, BS300 (15kg and 18kg) with precision layer winding. Wire baskets K415 (28 kg with precision layer winding) wrapped in vacuum film with silica gel insert and packed in carton box. Delivered on wooden pallets (standard 800 х 1200 mm) 1080 each. Other pallets are possible under agreement with customer.
Drums 250kg each (we can provide all necessary accessories: plastic cap, adapter, cable-duct of any length, plastic cover).
Compulsory incoming inspection allows to produce the wire with the best content of the main chemical elements and minimal content of detrimental impurities which can negatively affect welding-technological qualities of welding and quality of welding seam.
Production control on every stage let us produce the goods of high quality.
Wire stationarity and stable diameter on the whole length ensure smooth feeding of wire by the rollers of the feeding device and its free pass through the liner.
Copper coated surface as well as improved polished surface provides goos electric contact with contact tip which also positively influences on the welding-technological qualities of welding wire.
Chemical composition Raw materials are delivered to us according all our requirements which allows us to produce the wire fully corresponding with the requirements of your production. Below you can find standard types of wire which we constantly have at warehouse:
Wire grade (S1)
Chemical composition of the wire: С (up to 0,10 %) Mn (0,35 – 0,6%) Si (up to 0,03%) P (≤0,03%) S (≤0,03%)
Mechanical properties of wire:
Tensile strength, MPa: 1250-1323
Mechanical properties of deposited metal:
Yield point, MPa 350 – 370
Tensile strength, MPa 480 - 520
Elongation,% 24
Impact value, KV, J +20˚С -110; -40˚С – 50.
Wire grade (S2)
Chemical composition of the wire: С (≤0,10%) Mn (0,8 – 1,1%) Si (up to 0,06 %) P (≤0,03%) S (≤0,03%)
Mechanical properties of wire:
Tensile strength, MPa: : 1250-1323
Mechanical properties of deposited metal:
Yield point, MPa 420 - 440
Tensile strength, MPa 510-520
Elongation,% >30
Impact value, KV, J -20˚С -50; -40˚С – 30.
Wire grade (S2Mo)
Chemical composition of the wire: С (≤0,10%) Mn (0,95 – 1,2%) Si (up to 0,06 %) P (≤0,02%) S (≤0,02%)Mo (0,45 - 0,65)
Mechanical properties of deposited metal:
Yield point, MPa 510 - 520
Tensile strength, MPa 600 - 650
Elongation,% >24
Impact value, KV, J -20˚С -160;
Wire diameters, mm: 1,2; 1,6; 2,0; 2,4; 3,0; 3,2; 4,0; 5,0 (other diameters are possible under agreement with customer).
Packing: wire baskets K300, BS300 (15kg and 18kg) with precision layer winding. Wire baskets K415 (28 kg with precision layer winding) wrapped in vacuum film with silica gel insert and packed in carton box. Delivered on wooden pallets (standard 800 х 1200 mm) 1080 each. Other pallets are possible under agreement with customer.
Drums 250kg each (we can provide all necessary accessories: plastic cap, adapter, cable-duct of any length, plastic cover).
Все продукты
Solid welding wire for welding of high-alloy steel in an atmosphere of shielding gas (GMAW)
Wire diameters, mm: 0,8, 1,0; 1,2; 1,6; 2,0; 2,4; 3,0; 3,2; 4,0 (other diameters are possible under agreement with customer).
Packing: plastic spools D200 (5kg) and D300 (15kg). Delivered on wooden pallets (standard 800 х 1200 mm) 1080 each. Other pallets are possible under agreement with customer.
Below you can find standard types of wire which we constantly have at warehouse:
Wire grade (AWS А5.9 - ER 308L)
Chemical composition of the wire: С (≤0,03%) Mn (1,0 – 2,5%) Si (0,30 – 0,65%) Сr (19,5 – 22,00) Ni (9,0 – 11,0) P (≤0,03%) S (≤0,03%) Mo,Cu (≤0,75%)
Mechanical properties of deposited metal:
Tensile strength, MPa > 520
Elongation,% 35
Application: For automatic (semi-automatic) welding of stainless steel with Chrome content ~ 18% and nickel content ~ 8% with DC of reversed polarity in argon atmosphere. Deposited metal has high corrosion resistance. Low carbon content reduce risk of intercrystalline corrosion appearance.
Wire grade (AWS А5.9 - ER 308LSi)
Chemical composition of the wire: С (≤0,03%) Mn (1,0 – 2,5%) Si (0,65 – 1,0%) Cr (19,5 – 22,00) Ni (9,0 – 11,0) P (≤0,03%) S (≤0,03%) Mo,Cu (≤0,75%)
Mechanical properties of deposited metal:
Tensile strength, MPa > 520
Elongation,% 35
Application: For automatic (semi-automatic) welding of stainless steel with Chrome content ~ 18% and nickel content ~ 8% with DC of reversed polarity in argon atmosphere. Deposited metal has high corrosion resistance. Low carbon content reduce risk of intercrystalline corrosion appearance. Silicon content provides high quality of welding seam.
Wire grade (AWS А5.9 - ER 309LSi)
Chemical composition of the wire: С (≤0,03%) Mn (1,0 – 2,5%) Si (0,65 – 1,0%) Cr (23,0 – 25,00) Ni (12,0 – 14,0) P (≤0,03%) S (≤0,03%) Mo,Cu (≤0,75%)
Mechanical properties of deposited metal:
Tensile strength, MPa > 600
Elongation,% 25
Application: For automatic (semi-automatic) welding of mixed steel (stainless with no- and low-alloy steel), and also for welding of austenitic stainless steel with Chrome content ~ 24% and Nickel content ~ 13% with DC of reversed polarity in argon atmosphere. The wire provides corrosion resistance of welding seam – the same as corrosion resistance of the main metal. Silicon content provides high quality of welding seam.
Wire grade СВ-07Х25Н13 (AWS А5.9 - ER 309LSi)
Chemical composition of the wire: С (≤0,03%) Mn (1,0 – 2,5%) Si (0,65 – 1,0%) Cr (23,0 – 25,00) Ni (12,0 – 14,0) P (≤0,03%) S (≤0,03%) Mo,Cu (≤0,75%)
Mechanical properties of deposited metal:
Tensile strength, MPa > 600
Elongation,% 25
Application: For automatic (semi-automatic) welding of mixed steel (stainless with no- and low-alloy steel), and also for welding of austenitic stainless steel with Chrome content ~ 24% and Nickel content ~ 13% with DC of reversed polarity in argon atmosphere. The wire provides corrosion resistance of welding seam – the same as corrosion resistance of the main metal. Silicon content provides high quality of welding seam.
Wire grade (AWS А5.9 - ER 316LSi)
Chemical composition of the wire: С (≤0,03%) Mn (1,0 – 2,5%) Si (0,65 – 1,0%) Cr (18,0 – 20,00) Ni (11,0 – 14,0) P (≤0,03%) S (≤0,03%) Mo (≥2,00%) Cu (≤0,75%)
Mechanical properties of deposited metal:
Tensile strength, MPa > 520
Elongation,% 30
Application: For automatic (semi-automatic) welding of stainless steel with Chrome content ~ 18% nickel content ~ 12% molybdenum content ~ 3% with Chrome content 13% and 17% with DC of reversed polarity in argon atmosphere. Welding seam provides high resistance against intercrystalline corrosion in acidic and chlorinated condition. Low carbon content reduces risk of intercrystalline corrosion appearance. Silicon content provides high quality of welding seam.
Wire grade (AWS A5.9 - ER 321)
Chemical composition of the wire: С (≤0,08%) Mn (1,0 – 2,5%) Si (0,3 – 0,65%) Cr(18,0 – 20,50) Ni (9,0 – 10,5) P (≤0,03%) S (≤0,03%) Ti (9хС-1,0%) Cu (≤0,75%)
Mechanical properties of deposited metal:
Tensile strength, MPa > 520
Elongation,% 35
Application: For automatic (semi-automatic) welding of stainless steel types with DC of reversed polarity in argon atmosphere with providing of high strengthening characetristics of deposited metal and high resistance against intercrystalline corrosion.
Wire grade (AWS А5.9 - ER 347Lsi)
Chemical composition of the wire: С (≤0,03%) Mn (1,0 – 2,5%) Si (0,65 – 1,0%) Cr (19,0 – 21,50) Ni (9,0 – 11,0) P (≤0,03%) S (≤0,03%) Nb (9хС-1,0%) Mo,Cu (≤0,75%)
Mechanical properties of deposited metal:
Tensile strength, MPa > 520
Elongation,% 35
Application: For automatic (semi-automatic) welding of stainless steel types with DC of reversed polarity in argon atmosphere. The wire is stabilized by niobium which provides high resistance against intercrystalline corrosion anf high quality of welding seam. The metal of the seam is notable for its corrosion resistance against aggressive conditions on 450-600˚С with providing of high strengthening characetristics. Low carbon content reduces risk of intercrystalline corrosion appearance. Silicon content provides high quality of welding seam.
Wire grade AWS A5.9 - ER 2209
Chemical composition of the wire: С (≤0,03%) Mn (0,5 – 2,0%) Si (< 0,9%) Сr (21,5 – 23,5%) Ni (7,5 – 9,5%) P (≤0,03%) S (≤0,03%) Mo (2,5 – 3,5%) N (0,08 – 0,2%) Cu (≤0,75%)
Mechanical properties of deposited metal:
Yield point, MPa > 600
Tensile strength, MPa > 765
Elongation,% > 28
Impact value, KCV:
- ≥125 J/cm2 at +20°С;
- ≥ 106 J/cm2 at -20°С;
- ≥ 75 J/cm2 at -60°С
Application: Applied in chemical engineering, petroleum industry, in production of shelf constructions, oil drilling platforms and for cellulose and paper industry in machine building. Also it can be applied for welding of low-cost duplex steel. The deposited metal is defined by high strengthened and flexible qualities in aggregate with high resistance of welding seam against intercrystalline and knife-line corrosion and corrosion under the voltage in hydrosulfuric and chloride conditions. Welding wire corrosion-resistant (stainless steel) of solid cross-section ER 2209 is designed for electric arc welding in an atmosphere of shielding gas (Ar and Ar/CО₂) of austenite-to-ferrite (standard duplex) steel which consist Cr ~22%, Ni ~ 5%, Мо ~ 3%, N, such as S31803, S32205, W.Nr 1.4462 and their analogues.
Wire grade AWS A5.9 - ER 312
Chemical composition of the wire: С (≤0,15%) Mn (1,0 – 2,5%) Si (0,30 – 0.65%) Сr (28,0 – 32,0%) Ni (8,0 – 10,5%) P (≤0,03%) S (≤0,03%) Cu (≤0,75%)
Mechanical properties of deposited metal:
Yield point, MPa > 500
Tensile strength, MPa > 750
Elongation,% > 20
Impact energy:
- ≥30 J at +20°С;
Application: Applied in chemical engineering, petroleum industry, in production of shelf constructions, for cellulose and paper industry in machine building, in repair shops.
Typical fields of application include welding of manganese steel, tool steel, spring steel, byffering as well as welding of mixed steel of different grades. Crack-resisting seam with increased content of ferrite ~ FN50 is formed while welding. The wire is also applied for welding of duplex steel. The deposited metal has high strengthening and flexible qualities.
Welding wire corrosion-resistant (stainless steel) of solid cross-section ER312 is designed for electric arc welding in an atmosphere of shielding gas (Ar and Ar/CО₂)
Wire grade AWS A5.9 - ER 307
Chemical composition of the wire: С (0,04 – 0,14%) Mn (3,3 – 4,75) Si (0,30 – 0,65%) Сr (19,5 – 22,5%) Ni (8,0 – 10,7%) P (≤0,03%) S (≤0,03%) Cu (≤0,75%)
Mechanical properties of deposited metal:
Yield point, MPa > 500
Tensile strength, MPa > 750
Elongation,% > 20
Impact energy:
≥30 J at +20°С;
Application: Applied in chemical engineering, petroleum industry, in production of shelf constructions, for cellulose and paper industry in machine building, in repair shops.
Typical fields of application include joining of 14 Mn–steel, spring steel, tool steel, high-carbon steel. Wire ER 307 is recommended for overlaying welding of buffer layer on the surface before overlaying welding of the solid layer. Deposited metal is solid after peening, it has good resistance against pore formation, thermal resistance and scale resistance up 8500С.
Packing: plastic spools D200 (5kg) and D300 (15kg). Delivered on wooden pallets (standard 800 х 1200 mm) 1080 each. Other pallets are possible under agreement with customer.
Below you can find standard types of wire which we constantly have at warehouse:
Wire grade (AWS А5.9 - ER 308L)
Chemical composition of the wire: С (≤0,03%) Mn (1,0 – 2,5%) Si (0,30 – 0,65%) Сr (19,5 – 22,00) Ni (9,0 – 11,0) P (≤0,03%) S (≤0,03%) Mo,Cu (≤0,75%)
Mechanical properties of deposited metal:
Tensile strength, MPa > 520
Elongation,% 35
Application: For automatic (semi-automatic) welding of stainless steel with Chrome content ~ 18% and nickel content ~ 8% with DC of reversed polarity in argon atmosphere. Deposited metal has high corrosion resistance. Low carbon content reduce risk of intercrystalline corrosion appearance.
Wire grade (AWS А5.9 - ER 308LSi)
Chemical composition of the wire: С (≤0,03%) Mn (1,0 – 2,5%) Si (0,65 – 1,0%) Cr (19,5 – 22,00) Ni (9,0 – 11,0) P (≤0,03%) S (≤0,03%) Mo,Cu (≤0,75%)
Mechanical properties of deposited metal:
Tensile strength, MPa > 520
Elongation,% 35
Application: For automatic (semi-automatic) welding of stainless steel with Chrome content ~ 18% and nickel content ~ 8% with DC of reversed polarity in argon atmosphere. Deposited metal has high corrosion resistance. Low carbon content reduce risk of intercrystalline corrosion appearance. Silicon content provides high quality of welding seam.
Wire grade (AWS А5.9 - ER 309LSi)
Chemical composition of the wire: С (≤0,03%) Mn (1,0 – 2,5%) Si (0,65 – 1,0%) Cr (23,0 – 25,00) Ni (12,0 – 14,0) P (≤0,03%) S (≤0,03%) Mo,Cu (≤0,75%)
Mechanical properties of deposited metal:
Tensile strength, MPa > 600
Elongation,% 25
Application: For automatic (semi-automatic) welding of mixed steel (stainless with no- and low-alloy steel), and also for welding of austenitic stainless steel with Chrome content ~ 24% and Nickel content ~ 13% with DC of reversed polarity in argon atmosphere. The wire provides corrosion resistance of welding seam – the same as corrosion resistance of the main metal. Silicon content provides high quality of welding seam.
Wire grade СВ-07Х25Н13 (AWS А5.9 - ER 309LSi)
Chemical composition of the wire: С (≤0,03%) Mn (1,0 – 2,5%) Si (0,65 – 1,0%) Cr (23,0 – 25,00) Ni (12,0 – 14,0) P (≤0,03%) S (≤0,03%) Mo,Cu (≤0,75%)
Mechanical properties of deposited metal:
Tensile strength, MPa > 600
Elongation,% 25
Application: For automatic (semi-automatic) welding of mixed steel (stainless with no- and low-alloy steel), and also for welding of austenitic stainless steel with Chrome content ~ 24% and Nickel content ~ 13% with DC of reversed polarity in argon atmosphere. The wire provides corrosion resistance of welding seam – the same as corrosion resistance of the main metal. Silicon content provides high quality of welding seam.
Wire grade (AWS А5.9 - ER 316LSi)
Chemical composition of the wire: С (≤0,03%) Mn (1,0 – 2,5%) Si (0,65 – 1,0%) Cr (18,0 – 20,00) Ni (11,0 – 14,0) P (≤0,03%) S (≤0,03%) Mo (≥2,00%) Cu (≤0,75%)
Mechanical properties of deposited metal:
Tensile strength, MPa > 520
Elongation,% 30
Application: For automatic (semi-automatic) welding of stainless steel with Chrome content ~ 18% nickel content ~ 12% molybdenum content ~ 3% with Chrome content 13% and 17% with DC of reversed polarity in argon atmosphere. Welding seam provides high resistance against intercrystalline corrosion in acidic and chlorinated condition. Low carbon content reduces risk of intercrystalline corrosion appearance. Silicon content provides high quality of welding seam.
Wire grade (AWS A5.9 - ER 321)
Chemical composition of the wire: С (≤0,08%) Mn (1,0 – 2,5%) Si (0,3 – 0,65%) Cr(18,0 – 20,50) Ni (9,0 – 10,5) P (≤0,03%) S (≤0,03%) Ti (9хС-1,0%) Cu (≤0,75%)
Mechanical properties of deposited metal:
Tensile strength, MPa > 520
Elongation,% 35
Application: For automatic (semi-automatic) welding of stainless steel types with DC of reversed polarity in argon atmosphere with providing of high strengthening characetristics of deposited metal and high resistance against intercrystalline corrosion.
Wire grade (AWS А5.9 - ER 347Lsi)
Chemical composition of the wire: С (≤0,03%) Mn (1,0 – 2,5%) Si (0,65 – 1,0%) Cr (19,0 – 21,50) Ni (9,0 – 11,0) P (≤0,03%) S (≤0,03%) Nb (9хС-1,0%) Mo,Cu (≤0,75%)
Mechanical properties of deposited metal:
Tensile strength, MPa > 520
Elongation,% 35
Application: For automatic (semi-automatic) welding of stainless steel types with DC of reversed polarity in argon atmosphere. The wire is stabilized by niobium which provides high resistance against intercrystalline corrosion anf high quality of welding seam. The metal of the seam is notable for its corrosion resistance against aggressive conditions on 450-600˚С with providing of high strengthening characetristics. Low carbon content reduces risk of intercrystalline corrosion appearance. Silicon content provides high quality of welding seam.
Wire grade AWS A5.9 - ER 2209
Chemical composition of the wire: С (≤0,03%) Mn (0,5 – 2,0%) Si (< 0,9%) Сr (21,5 – 23,5%) Ni (7,5 – 9,5%) P (≤0,03%) S (≤0,03%) Mo (2,5 – 3,5%) N (0,08 – 0,2%) Cu (≤0,75%)
Mechanical properties of deposited metal:
Yield point, MPa > 600
Tensile strength, MPa > 765
Elongation,% > 28
Impact value, KCV:
- ≥125 J/cm2 at +20°С;
- ≥ 106 J/cm2 at -20°С;
- ≥ 75 J/cm2 at -60°С
Application: Applied in chemical engineering, petroleum industry, in production of shelf constructions, oil drilling platforms and for cellulose and paper industry in machine building. Also it can be applied for welding of low-cost duplex steel. The deposited metal is defined by high strengthened and flexible qualities in aggregate with high resistance of welding seam against intercrystalline and knife-line corrosion and corrosion under the voltage in hydrosulfuric and chloride conditions. Welding wire corrosion-resistant (stainless steel) of solid cross-section ER 2209 is designed for electric arc welding in an atmosphere of shielding gas (Ar and Ar/CО₂) of austenite-to-ferrite (standard duplex) steel which consist Cr ~22%, Ni ~ 5%, Мо ~ 3%, N, such as S31803, S32205, W.Nr 1.4462 and their analogues.
Wire grade AWS A5.9 - ER 312
Chemical composition of the wire: С (≤0,15%) Mn (1,0 – 2,5%) Si (0,30 – 0.65%) Сr (28,0 – 32,0%) Ni (8,0 – 10,5%) P (≤0,03%) S (≤0,03%) Cu (≤0,75%)
Mechanical properties of deposited metal:
Yield point, MPa > 500
Tensile strength, MPa > 750
Elongation,% > 20
Impact energy:
- ≥30 J at +20°С;
Application: Applied in chemical engineering, petroleum industry, in production of shelf constructions, for cellulose and paper industry in machine building, in repair shops.
Typical fields of application include welding of manganese steel, tool steel, spring steel, byffering as well as welding of mixed steel of different grades. Crack-resisting seam with increased content of ferrite ~ FN50 is formed while welding. The wire is also applied for welding of duplex steel. The deposited metal has high strengthening and flexible qualities.
Welding wire corrosion-resistant (stainless steel) of solid cross-section ER312 is designed for electric arc welding in an atmosphere of shielding gas (Ar and Ar/CО₂)
Wire grade AWS A5.9 - ER 307
Chemical composition of the wire: С (0,04 – 0,14%) Mn (3,3 – 4,75) Si (0,30 – 0,65%) Сr (19,5 – 22,5%) Ni (8,0 – 10,7%) P (≤0,03%) S (≤0,03%) Cu (≤0,75%)
Mechanical properties of deposited metal:
Yield point, MPa > 500
Tensile strength, MPa > 750
Elongation,% > 20
Impact energy:
≥30 J at +20°С;
Application: Applied in chemical engineering, petroleum industry, in production of shelf constructions, for cellulose and paper industry in machine building, in repair shops.
Typical fields of application include joining of 14 Mn–steel, spring steel, tool steel, high-carbon steel. Wire ER 307 is recommended for overlaying welding of buffer layer on the surface before overlaying welding of the solid layer. Deposited metal is solid after peening, it has good resistance against pore formation, thermal resistance and scale resistance up 8500С.
Все продукты
Welding electrodes (for welding of carbon steel and low-alloyed steel, stainless steel and cast iron), build-up electrodes MMA SMAW
E6013 AWS A5.1
Type of coating: rutile
This electrode is designed for welding of ordinary and important constructions made from low-carbon steel. It is widely used for welding of steel strips with galvanic coating. It is not sensible to rust and surface contaminations. It is recommended for welding of carbon structural steel and ship steel. It is multipurpose electrode providing high quality of the welding seam. It is remarkable for easy arc lightning, including repeated lightning, small spattering and higher metal deposit factor. It is perfect for tack weld and root seam. Easy arc ignition, including repeated ignition. Small spattering.
Current type: ~/.=+
E6013 AWS A5.1
Type of coating: rutile-cellulose
This electrode is used for welding of sheet metal. Temporary weld is possible. These electrodes are low-sensitive to the quality of work piece edges preparation and allow to weld galvanized, painted, dirty and lightly rusted steel and bring out welding in "water area". Easy ignition and high elasticity of welding arc, lack of special requirements to work piece edges preparation, possibility of welding in all attitude positions without changing of welding current allows to bring out welding in difficult positions even to beginners and low-qualified welders.
Current type: ~/.=+
E6015 AWS A5.1
Type of coating: basic
Electrode for welding of super duty constructions from carbon and low alloy steel where there are increased plasticity and impact strength requirements to seam metal. It has high welding-technological qualities. The main application: building and assembly jobs.
Current type: =+
E7015 AWS A5.1
Type of coating: basic
Electrode for welding of super duty constructions from carbon and low alloy steel where there are increased plasticity and impact strength requirements to seam metal. It has high welding-technological qualities. The main application: building and assembly jobs.
Current type: =+
E7016 AWS A5.1
Type of coating: basic
Import-substituting electrode (LB-52U)
The main application – welding of rotary and non-rotary joints of pipelines, welding of root seams from steel К52 and metal constructions from carbon and low alloy steel. Low content of hydrogen.
Current type: =±
E308L-17 AWS A5.4
Type of coating: rutile (basic coating is possible for special orders)
All-purpose electrode for welding of constructions made from corrosion-resistant steel, where there are no strict requirements for seam metal resistance to grain-boundary corrosion. It has high welding-technological qualities. Welding in all attitude positions is possible except vertical "top to bottom".
Current type: .~/=+
E309L-17 AWS A5.4
Type of coating: rutile (basic coating is possible for special orders)
Welding of constructions made from corrosion-resistant and heat-resistant steel with operation temperature up to 1050˚С, where there are strict requirements for seam metal resistance to grain-boundary corrosion. Welding of austenitic stainless steel with carbon steel. Pad weld of buffer layer before using of ОЗЛ-8. High crack-resistance. It has high welding-technological qualities. Welding in all attitude positions is possible except vertical "top to bottom".
Current type: ~/ =+
E310-16 AWS A5.4
Type of coating: basic
Electrode for welding of constructions made from heat-resistant steel, working in oxidizing ambient with temperature up to 1150°С. (thermal and hardening machine, steam boilers, chimneys, etc.)
Welding in all attitude positions is possible except vertical "top to bottom".
Current type: ~/=+
E347-16 AWS A5.4
Type of coating: basic
This electrode has high welding-technological qualities. welding of duty constructions made from corrosion-resistant steel, where there are requirements for resistance to intercrystalline corrosion. Seam metal is corrosion resistant to aggressive environment with the temperature up to 450-600˚С.
Current type: ~/ = +
E318-17 AWS A5.4
Type of coating: basic
Austenite and stabilized by niobium electrode for welding of duty constructions from non-stabilized and stabilized corrosion-resistant chrome-nickel-molybdenum steel working with the temperature up to 360˚С, where there are high requirements for resistance to intercrystalline corrosion. Resistance to oxidation up to the temperature of 800˚С. It has high welding-technological qualities. Welding in all attitude positions is possible except vertical "top to bottom".
Current type: ~/=+
E 307-15 AWS A5.4
Type of coating: basic
This is special electrode with high viscosity of seam metal which allows to weld metals with limited weldability without preliminary heating. It is effective for welding of fatigue cracks through the work pieces made from the afore-named steel, pad weld of carbon and low alloy steel (railing, contact joints), pad weld of work pieces made from manganese steel type Г13 (bulldozer parts), welding of digger assemblies (teeth), restoration of rings' surface and counter rollers of burning kiln in cement industry, etc. High crack-resistance of the welding seam. This electrode is also applied for welding of armor.
Current type: =+
Type of coating: rutile
This electrode is designed for welding of ordinary and important constructions made from low-carbon steel. It is widely used for welding of steel strips with galvanic coating. It is not sensible to rust and surface contaminations. It is recommended for welding of carbon structural steel and ship steel. It is multipurpose electrode providing high quality of the welding seam. It is remarkable for easy arc lightning, including repeated lightning, small spattering and higher metal deposit factor. It is perfect for tack weld and root seam. Easy arc ignition, including repeated ignition. Small spattering.
Current type: ~/.=+
E6013 AWS A5.1
Type of coating: rutile-cellulose
This electrode is used for welding of sheet metal. Temporary weld is possible. These electrodes are low-sensitive to the quality of work piece edges preparation and allow to weld galvanized, painted, dirty and lightly rusted steel and bring out welding in "water area". Easy ignition and high elasticity of welding arc, lack of special requirements to work piece edges preparation, possibility of welding in all attitude positions without changing of welding current allows to bring out welding in difficult positions even to beginners and low-qualified welders.
Current type: ~/.=+
E6015 AWS A5.1
Type of coating: basic
Electrode for welding of super duty constructions from carbon and low alloy steel where there are increased plasticity and impact strength requirements to seam metal. It has high welding-technological qualities. The main application: building and assembly jobs.
Current type: =+
E7015 AWS A5.1
Type of coating: basic
Electrode for welding of super duty constructions from carbon and low alloy steel where there are increased plasticity and impact strength requirements to seam metal. It has high welding-technological qualities. The main application: building and assembly jobs.
Current type: =+
E7016 AWS A5.1
Type of coating: basic
Import-substituting electrode (LB-52U)
The main application – welding of rotary and non-rotary joints of pipelines, welding of root seams from steel К52 and metal constructions from carbon and low alloy steel. Low content of hydrogen.
Current type: =±
E308L-17 AWS A5.4
Type of coating: rutile (basic coating is possible for special orders)
All-purpose electrode for welding of constructions made from corrosion-resistant steel, where there are no strict requirements for seam metal resistance to grain-boundary corrosion. It has high welding-technological qualities. Welding in all attitude positions is possible except vertical "top to bottom".
Current type: .~/=+
E309L-17 AWS A5.4
Type of coating: rutile (basic coating is possible for special orders)
Welding of constructions made from corrosion-resistant and heat-resistant steel with operation temperature up to 1050˚С, where there are strict requirements for seam metal resistance to grain-boundary corrosion. Welding of austenitic stainless steel with carbon steel. Pad weld of buffer layer before using of ОЗЛ-8. High crack-resistance. It has high welding-technological qualities. Welding in all attitude positions is possible except vertical "top to bottom".
Current type: ~/ =+
E310-16 AWS A5.4
Type of coating: basic
Electrode for welding of constructions made from heat-resistant steel, working in oxidizing ambient with temperature up to 1150°С. (thermal and hardening machine, steam boilers, chimneys, etc.)
Welding in all attitude positions is possible except vertical "top to bottom".
Current type: ~/=+
E347-16 AWS A5.4
Type of coating: basic
This electrode has high welding-technological qualities. welding of duty constructions made from corrosion-resistant steel, where there are requirements for resistance to intercrystalline corrosion. Seam metal is corrosion resistant to aggressive environment with the temperature up to 450-600˚С.
Current type: ~/ = +
E318-17 AWS A5.4
Type of coating: basic
Austenite and stabilized by niobium electrode for welding of duty constructions from non-stabilized and stabilized corrosion-resistant chrome-nickel-molybdenum steel working with the temperature up to 360˚С, where there are high requirements for resistance to intercrystalline corrosion. Resistance to oxidation up to the temperature of 800˚С. It has high welding-technological qualities. Welding in all attitude positions is possible except vertical "top to bottom".
Current type: ~/=+
E 307-15 AWS A5.4
Type of coating: basic
This is special electrode with high viscosity of seam metal which allows to weld metals with limited weldability without preliminary heating. It is effective for welding of fatigue cracks through the work pieces made from the afore-named steel, pad weld of carbon and low alloy steel (railing, contact joints), pad weld of work pieces made from manganese steel type Г13 (bulldozer parts), welding of digger assemblies (teeth), restoration of rings' surface and counter rollers of burning kiln in cement industry, etc. High crack-resistance of the welding seam. This electrode is also applied for welding of armor.
Current type: =+
Все продукты
Cold drawning steel wire
We use advanced technologies of wire drawing which provides perfect technological qualities of the wire. The wire has stable diameter on all its length, it is balanced. We constantly control the clearness of the wire surface.
Wire grade Sae 1006
Metal chemistry: С (≤0,08%) Mn (0,25 – 0,4%) Si (≤0,05%) P (≤0,04%) S (≤0,05%)
Mechanical properties: Strength 360 – 450 Mpa
Elongation, % ≤15-20
Wire grade Sae 1008
Metal chemistry: С (≤0,10%) Mn (0,3 – 0,5%) Si (≤0,05%) P (≤0,04%) S (≤0,05%)
Mechanical properties: Strength 370 – 430 Mpa
Elongation, % ≤15-20
Delivery: Coils of 750 – 950 kg. (Inner and outer diameters of coils are agreed with the Buyer). Coils of 350 – 450 kg (Inner and outer diameters of coils are agreed with the Buyer).
Also cold supply with heat treated wire and the wire with another chimecal composition and mechanical propertises.
Wire grade Sae 1006
Metal chemistry: С (≤0,08%) Mn (0,25 – 0,4%) Si (≤0,05%) P (≤0,04%) S (≤0,05%)
Mechanical properties: Strength 360 – 450 Mpa
Elongation, % ≤15-20
Wire grade Sae 1008
Metal chemistry: С (≤0,10%) Mn (0,3 – 0,5%) Si (≤0,05%) P (≤0,04%) S (≤0,05%)
Mechanical properties: Strength 370 – 430 Mpa
Elongation, % ≤15-20
Delivery: Coils of 750 – 950 kg. (Inner and outer diameters of coils are agreed with the Buyer). Coils of 350 – 450 kg (Inner and outer diameters of coils are agreed with the Buyer).
Also cold supply with heat treated wire and the wire with another chimecal composition and mechanical propertises.
Все продукты
Want to get an offer?
Let us know, which products you are interested in and we will send you an offer.
The latest drawing equipment significantly reduces costs. We also note that we produce more than 40,000 tons of finished products per year, which allows us to save due to economies of scale.
In addition to selecting materials specifically for your needs, we will help with the choice of welding machines, consumables, and the welding process itself. We also have a strong team of lawyers, marketers, financiers.
We make an order within one week. We have our own logistics department and our own transport trucks, which allows us to quickly deliver to the buyer's warehouse
Competitive price
Professionals
Fast Delivery
About Us
We offer the chemistry of raw materials (wire) (certain chemical elements that face your needs). The same applies to physical mechanics of a wire or deposited material.
We control raw materials and products at every stage. Our own laboratory controls the input material as well as the finished product.
It is important for us that the experience with our company is only positive. We are always ready to solve any problems.
Customised Material
Quality
Power of Oliver
Production space — 10 000 m²
2 500+
tons of welding wire and stick electrodes produce per month
5 000+
tons of products in stock ready
for shipment
for shipment
500+
highly qualified staff
Modern production lines allow us to process orders of any volume
STILL HAVE ANY QUESTIONS?
The central office of Oliver Ltd.:
220118, Republic of Belarus,
Mashinostroiteley str., 29
Mon-Fri 8.30-17.00
220118, Republic of Belarus,
Mashinostroiteley str., 29
Mon-Fri 8.30-17.00
Contacts
Do not hesitate to contact us!
